Car Blind Spot Detection System Companies
It’s a fact that evolution hits every market sooner or later, just as it hit the blind spot industry in 1999. The technical picture of blind spot assistance changed various names in its lifespan. Sometimes it stayed in the vehicles on its own as BLIS, and sometimes, creators combined it with other aiding techniques.
No matter what the evolution stage of the car blind spot detection system companies was, it always served the purpose and came in front as an ideal solution. This article will summarize each and every detail of these stages. Plus, it will give you an in-depth analysis of how things turned out for different evolution stages and why they were successful. So, keep reading because this knowledge might help you stand your ground in this industry.
Introduction To The Term “Blind Spot Assistance”
Past decades may have introduced you to the term blind spot assistance. Its need arose far early in the timeline with vehicle production. Yet, the technology came late. To begin with, blind spot assistance acts as an active driving assist. So, it focuses on the safety of drivers and vehicles.
Meanwhile, this technical term can also help observe unseen spots of road. You may ask what sections remain invisible to us. All in all, every vehicle has some blind zones. Think of them as restricted vision spots due to vehicle structure. Experts named them “blind spots,” and ignoring them can increase accident risks.
The vehicle’s structural pillars are the reason why these zones exist. In the driver’s seat, having 360-degree vision becomes impossible. Therefore, you can miss objects in your blind zones. It increases the chances of your collisions, elevating the damage risk. To decrease this risk, we need a helping hand, and that’s where blind spot assistance jumps in.
With technical efficiency, car blind spot detection system companies have brought in blind spot monitoring systems. These are devices used to detect vehicle’s surrounding and help monitor the road accurately. Its functioning is no rocket science. It is a no-brainer, all thanks to millimeter-wave radars.
A blind spot monitor uses blind spot detectors, often called radars, to detect any movement. The basic principle involves the oscillation of microwaves. So, the detection can be pretty quick. Apart from that, some ultrasonic sensors and image technology also help in some systems.
The First Blind Spot System And Everything About Its Creation
The term blind spot system isn’t that old. It protruded back in 1995. Back then, there wasn’t a great concept of driving assists. However, car blind spot detection system companies knew they needed something efficient. Years passed, and George Platzer came forward with a helpful statement. Using the society of automotive engineers as a platform for his paper, he opinioned a way to change driving habits.
In the words of George Platzer, side mirrors can effectively monitor blind spot areas. But it is possible only if their adjusted orientation is accurate. Ford was the first motor company that jumped into this product field. Let’s see how they made their way to the top.
Ford’s Platzer Blind Spot Monitor:
According to Platzer, the blind spot monitor concept was nothing more than accurate use of side mirrors. Later on, the integration of a technical approach came in place with the side mirrors. It took things up a notch, helping create a safe road environment.
Nowadays, car blind spot detection system companies use special blind spot side mirrors. The base of these is very much similar to Platzer’s assistance concept. Only thing missing is the digital program integration. For that reason, people consider side mirrors the first typical blind spot monitor.
Per technical criteria, a blind spot monitor is a collection of equipment. All its elements simultaneously perform detection, judgment, and alert procedures. So, Ford Motor Company’s successor Volvo introduced the world to a complete radar-oriented system.
2003 was the year of success for this firm. During this time, they made their move and brought the first blind spot system named BLIS. It is an auto safety car and technology award holder information system that Ford and its subsidiaries use. It all started in 2001 when Volvo tested its first car assist system. A safety concept car was used for rigorous testing. After all the satisfactory procedures, BLIS hit the road in 2003, being the first radar blind area detection system.
The system became so popular that Ford is still using it in their cars. As the idea came from George’s paper, so experts call it Platzer’s blind spot monitor. If we compare today’s aftermarket monitor system with Platzer’s system, it may appear a bit outdated. However, its accuracy has no limits making it ideal for vehicles.
BLIS isn’t a stationary vehicle detector. Instead, the monitor is active only at a certain speed range of 6km/h to 10km/h. Also, the system has a speed limit for target vehicles. Any vehicle in the blind zone with a speed of more than 20km/h triggers the alarm.
Volvo used an SUV to test out the product. That is how Volvo XC90 became the first blind spot system equipped vehicle. The system was adequately presentable at that time. It had door placed radar detectors and cameras for detection. Plus, in-vehicle lights were the main source of alarm in this system.
Developmental Changes In Car Blind Spot Detection System Companies In The Past
Undoubtedly, industries can’t survive with a single production strategy. For that reason, analytics develop new ideas that renovate existing products. Customers need to change with time, and these ideas support that. Furthermore, keeping up your pace with the world can help you stand out in the market. After all, retaining success is only possible if you keep providing exceptional value to customers.
Like any industry, blind spot detection system manufacturers also went through gradual changes. It hasn’t been long since the technology came on the market. Still, much has changed in the past decade, all thanks to technical advancements. Let’s jump in to see how car blind spot detection system companies have kept changing.
The first Platzer blind spot system in 1995 had limited features. It had vehicle detection and mutual connection with electronic stability control.
Mazda As The Follow-Up Blind Spot Company:
After introducing the first blind spot system in 2003, car firms started paying great attention to this aspect. However, vendors still hesitated to induce the newly created system in their vehicles. So, things got delayed, and blind spot monitors also became a thing of the past.
Afterward, things changed after the first auto safety car award reception. Car owners started to accept the system as a vital part. Therefore, car blind spot detection system companies started giving built-in blind spot systems in their vehicles.
Mazda followed up and introduced a brand-new blind spot system in 2008. Although they referred to it as blind spot monitoring (BSM) but, its function was similar to BLIS. The company added it to Mazda CX-9 Grand Touring at the start. Yet, it was available only for high-end trims.
As time passed, Mazda started adding it to the redesigned models like Mazda 6. Now, it has become the standard part of its high-trim cars and optional in lower trims.
Aftermarket Car Blind Spot Detection System Companies Roles
Besides these official firms, there were local car blind spot detection system companies in the past. Some started up after 1995. However, it wasn’t a trend then, so the thing never exploded. Everything kept going with the flow until 1999 when lane assist system got on the market.
Lane Assist Warning
1999 brought a special feature for a longer detection range. Ultimately, it helped the system to detect vehicles in adjacent lanes. As a result, it stopped unintentional merging during the lane switch. It isn’t as simple as it seems. Rather, this sub-technology came with massive complications.
Most car blind spot detection system companies used warning lights and only warned the drivers. However, their mode of alarm varied. Some used always-on alarms alerting the driver without the exception of the turn signal. In comparison, some came with a decent alert feature only if the turn signal is on. Still, people were getting frustrated with the repetitive alarm triggers. That is why companies gave a reactional button to turn it off.
Since 1999, lane change assist has been part of the blind spot system package. Moreover, some additional advancements are seen in its aspect. For instance, some car blind spot detection systems combined steering control with the system. That means the car will lock your steering along with an alarm trigger to prevent turning in a risky direction.
Combined Effect Of Radars And Cameras:
As time passed, companies learned that radars were enough for detection but not for monitoring. Similarly, drivers wanted something more than blinking lights. Therefore, experts thought it would be better to supply them with an option for active monitoring.
This technical advancement was possible only with cameras. Hence, in 2003 car blind spot detection system companies coupled radars and cameras through a digital connection. The result was a product that provided digital warning and a live feed of blind spots for owners.
Blind Spot And AEB:
AEB isn’t an extra extension for the sensor monitoring system. It is a separate feature that blind spots companies use in connection with the products. The term AEB refers to Automatic Emergency Braking.
Let’s be honest; human nature is prone to mistakes—no one is perfect. In essence, no matter how much you warn drivers, they may fail to perform safety measures in time. So, the AEB came into play. Its mutual connection with radar blind spot detection system deals with that late reaction.
2006 was the year when these systems came up in the market. Its working isn’t that difficult. It all starts from the detection through blind spot detection. Later, instead of only issuing an alert only, the system applies emergency brakes on its own, saving from potential crashes.
Speed Monitoring And Buzzer Induction:
Early automotive blind spot systems had a basic yet alarming problem. It gave the alert whenever something came up in the blind spot without judging whether it was a threat or not. It created misconceptions and disturbed drivers while driving. At the same time, some customers called it frustrating.
That is why, after 2012, car blind spot detection system companies brought active speed detection. Using millimeter-wave radars, it sent microwaves that bounced back and helped to judge the target’s credentials.
Constant signal reception can help the system to detect an object’s relative speed, distance, and impact time. Through that data, the system uses advanced algorithms to detect whether it poses a serious threat or not.
Gradual And Regional Evolution of Car Blind Spot Detection System Companies
Car blind spot detection system companies never evolved in a night. Instead, it took years for them to retain their success. These vendors made a place in the market with constant upgrades and gradual evolution. Besides that, their step-by-step progress isn’t confined to a single country or continent. On the contrary, it extends all the way to the USA, starting from China. Below we’ll discuss how different regions evolved and adopted this technology.
- Sweden was the first one to evolve into a vehicle blind spot detection system market. All that happened because of Volvo’s first radar sensor blind spot system. From there, its roots started sprouting in the USA, Canada, China, and other countries.
- In general, Europe is the best car blind spot market. Considering the fact that it is a source of automotive research, blind spot system companies are thriving there. Apart from that, it has an escalating economy that makes things more suitable.
- The list doesn’t stop there. According to recent reports, new countries have also jumped into the race for this industry’s success. Names like France, Germany, and Italy are coming up on the reports. These countries also play a massive part in creating market revenue for car blind spot detection system companies. Plus, India is becoming a major motor vehicle manufacturer. Thus, experts suggest its name may appear in the analytic reports next year.
- In 2018 Canada made it clear that driving any car without a rear blind spot camera system is against the law. It increased the demand for the systems greatly. Since then, the country is coming up as the major marketplace of car blind spot detection companies.
- On the other hand, some underdeveloped countries still don’t have these in their markets. Supply of OEM blind spot monitors isn’t possible everywhere around the globe. That is why people use aftermarket blind spot system companies. With its privilege, even outbound countries can easily order their blind spot monitor packages.
Present State Of The Car Blind Spot Detection System Companies
From 1995 to 2022, car blind spot detection system companies came a long way. Every year was an essential revenue-generating period for the industry. Even after the covid outbreak and strict financial inflation, it survived miraculously. Since then, the market hasn’t seen a downward vote on the board. Rather, it is breaking records by generating ten folds sale revenue.
Reports keep coming and going. Therefore, statistics change. In some papers, the current revenue of the obstacle detection blind spot system industry is around USD 1.9 billion. Some reports mark the positive income rate at USD 1.8 to 2.3 billion.
However, one thing stays the same in all the reports. Every analytic report or forecast chart guesses that the industry will progress in the coming years. Some experts suggested that the market could go upto USD 8 billion until 2032.
Is There A Place For Car Blind Spot Detection System Companies In The Future?
As car blind spot detection system owners, you don’t need to worry about the future. The reason is the escalating economic state of the blind spot system industry. You’ll get plenty of opportunities to sell your products as time passes. Aside from that, sooner or later, it will become an obligatory practice worldwide.
People now understand how vital these systems are. The upcoming years are the golden ones for blind spot detection system companies. Meanwhile, remember that this industry will not stop just within current technology. Just as it evolved in the previous decade, upcoming years will also change it. So, to retain a top place on the industry’s ladder, try to learn the evolution strategies with time.
Conclusion:
As for the key takeaways, the car blind spot detection system companies evolved from scratch and can potentially generate tremendous sales. However, it is possible only if the company’s customer satisfaction, product value, and credibility stay constantly positive.
Any firm can achieve that supremacy through upgrades and renovation. The company must be aware of the latest trends in the market. In addition, this article has given you an industrial history of the products. It can help you give a complete track for you to follow and evolve your firm into a better version.
If you have any questions, pls contact us!