motorcycle blind spot detection system 24G
Motorcycle blind spot detection system 2
motorcycle blind spot detection system MT02 24G
motorcycle blind spot detection system 24G
motorcycle blind spot detection system 24G
motorcycle blind spot detection system 24G

Motorcycles blind spot detection MT-02

Same as any ideal blind spot monitor for cars, our motorbike blind spot detection system also has some distinctive features. These features help our product to stand out in the crowd of contenders. Our 24G MT-02 motorcycle blind spot detection system has an early detection and warning mode; it alarms the driver in two different ways. Along with that, our blind spot monitor helps the motorbikers to change lanes safely and actively. Some of the premium features of our product are as follows:

Display

A Comprehensive Overview Of 24G MT-02 Motorcycle Blind Spot Detection System

Whether you are driving a car, a truck, or a motorcycle, there are several spots where you can’t look without taking your eyes off the road. In the case of motorcycles, the motorcycle helmets make it even more difficult for the bikers to look left, right and rear the road while driving. So, it is physically impossible for them to monitor the rear portion of the road and lower peripheral sides. These are the blind spots or no zones of a motorcycle.

motorcycle blind spot detection system 24G

Taking your eyes off the road to monitor your blind spots can have devastating results. That is why we designed our 24Ghz MT-02 motorcycle blind spot detection system that actively detects and alerts the driver about moving targets up to 20 meters in adjacent lanes. Keep reading to know how the MT-02 blind spot monitor provides a safe driving experience for the driver.

How Does 24G MT-02 Motorcycle Blind Spot Detection System Works?

Just as any other blind spot system, the 24G MT-02 motorcycle blind spot detection system has the same basic function of alerting the driver. It detects and gives an early warning to the driver about vehicles in adjacent lanes. The article will explain the system’s complete operation and general working principle.

General Working Principle:

Nowadays, every advanced car has a built-in blind spot detection system. And in the revolutionized world, it has become a necessity for motorbikes as well. A motorcycle blind spot detection system monitors and alerts the driver about any vehicle passing from the rear sides of the bike.

motorcycle blind spot detection system 24G

The 24G MT-02 motorcycle blind spot detection system has millimeter wave radar that helps detect target objects. A driver mounts the wave radar on the rear blink of the bike, which continuously emits microwaves. So, whenever a fast-moving vehicle comes across the detection area, it disrupts the waves, and the radar detects it as a target object.

In response to the detection, the wave radar triggers the alarm that alerts the driver about the vehicle in the adjacent lane with blind spot warning lights. Watching the always-on or blinking light, drivers become more cautious, saving them from hazardous collisions.

Inventory List Of The 24G MT-02 Motorcycle Blind Spot Detection System:

The 24G MT-02 motorcycle blind spot detection system package has every essential item for the installations and proper working of the system. These are the items a client gets inside the complete package:

motorcycle blind spot detection system 24Gmotorcycle blind spot detection system 24G

Name Quantity
24Ghz microwave radar 1
Warning light 2
Power line 1
Mounting bracket 1
Accessory package 1
Instruction book 1

Technical Specifications Of 24G MT-02 Motorcycle Blind Spot Detection System:

No. Item Specifications
01 Working voltage 12 V
02 Working frequency 24GHz
03 Signal angle ±60 degrees
04 working – 40℃ ~ + 85℃
05 Power consumption <2W
06 Water-proof level Ip 67
07 Distance resolution 0.4m
08 Detection distance 20 meters

 

What Are Important Features Of A 24G MT-02 Motorcycle Blind Spot Detection System?

Same as any ideal blind spot monitor for cars, our motorbike blind spot detection system also has some distinctive features. These features help our product to stand out in the crowd of contenders. Our 24G MT-02 motorcycle blind spot detection system has an early detection and warning mode; it alarms the driver in two different ways. Along with that, our blind spot monitor helps the motorbikers to change lanes safely and actively. Some of the premium features of our product are as follows:

Early Detection And Warning:

For some blind systems, bikers don’t have enough time to react to the situation even after the alerting light indicator. The 24G MT-02 motorcycle blind spot detection system solves this problem by warning the driver early about the vehicle that is about to pass from the side. It gives the bikers enough time to react and save themselves from a possible crash.

Lane changing Assist:

The side mirrors of a motorbike are not enough for the active lane changing. They can not give you a clear monitoring sight 20 meters behind your back, but our blind spot system does. 24G MT-02 motorcycle blind spot detection system detects and warns you about any approaching vehicle that the side mirrors may have missed. So, while changing the lane, if any car comes across the 20-meter radius of your motorbike, the system alerts you to take essential preventive measures.

Broad Detection Area:

motorcycle blind spot detection system 24G

Our 24G MT-02 motorcycle blind spot detection system provides one of the biggest ranging detection areas. It is 20 meters long and 0.2 to 4 meters wide. The greater detection span offers accurate results and ensures the driver’s safety.

Startup Mode:

Our 24G MT-02 motorcycle blind spot detection system has a built-in startup mode. This feature helps the driver ensure whether the system is functioning properly before the journey.

When the biker turns on the bike switch, the motorcycle blind spot sensor self-checks the system one time and powers it on. It results in turning on both the indicator warning lights. These lights turn off after a second or two, which indicates that the blind spot monitor is working properly.

All-time Applicational Use:

The visibility during bad weather conditions drops down to zero. That is why driving while lousy weather conditions might not be safe without a blind spot system. The motorcycle blind spot detection system alerts you about the target objects in the adjacent lanes that are impossible to be seen by the naked eye. So, it makes it easy and safe for a biker to drive through bad weather.

24G MT-02 motorcycle blind spot detection system has broad usage and can easily work in various conditions. The microwaves used for detection are highly penetrating. So, it penetrates the environmental hindrance and provides accurate results. That is the reason our product performs exceptionally well in windstorms, fog, and heavy rainfalls.

Why Is It Important To Use A Blind Spot System On Bikes?

People consider motorcycles a fast and easy transportation medium in today’s world. At the same time, these are not considered safer than cars and public transport buses. A motorcycle blind spot detection system improves the bike’s safety and provides a secure experience for everyone on the road. These are some of the main reasons why the blind spot system is a necessity for bikers:

Deals with Increased Vulnerability Due to Blind Spots:

motorcycle blind spot detection system 24G

Every vehicle on the road has several blind spots. The same is the case for bikes. A biker has to wear a motorcycle helmet for safety purposes, making it more challenging to keep an eye on the surroundings. The blind spots of a motorcycle, if left unmonitored, can cause accidents. That is why we use a blind spot system that prevents the bike from merging into other cars.

Provides Additional Driving Support.

If you are not using a motorcycle blind spot detection system, the only way for you to drive safe is if you keep monitoring your no zones. That is only possible if you take your eyes off the road and turn your head to examine your blind spot before changing a lane. Taking your eyes off the road might be a risky move. Also, turning the head again and again can be uncomfortable and annoying for the biker. A motorcycle blind spot detection system assists the driver, actively monitors the bike’s blind spots, and alerts the driver if it detects any moving vehicle.

What Are The Steps To Install A 24G MT-02 Motorcycle Blind Spot Detection System?

Installing our 24G MT-02 motorcycle blind spot detection system is a simple and swift process. Every accessory you need to mount the system on your bike has already been given in the package. You can make your blind spot system completely functional by following these easy instructions.

Installation Of A Radar Sensor:

motorcycle blind spot detection system 24G

The very first step of installing a motorcycle blind spot detection system is the mounting of a radar sensor. A blind spot radar sensor or wave radar is a black rectangular microwave radar with a wire attached.

  • The height of the motorcycle blind spot sensor must be 0.6 to 1.2 meters above the ground. This way, it can accurately detect moving vehicles in the adjacent rear lanes.
  • The angle of the radar sensor’s attachment must be perpendicular to the ground. This perpendicular angle ensures that the waves reach the 20-meter radius and prevents any false detection by the motorcycle blind spot detection system.
  • The driver mounts the blind spot radar sensor on the back of the driver near the backlight. So, The microwave radar signal is always towards the rear end of the motorcycle. The line that connects the radar to the warning lights exits right below the wave sensor, towards the bike’s handle.

How To Complete The Line Connection Of A 24G MT-02 Motorcycle Blind Spot Detection System?

The line connection of a motorcycle blind spot detection system is one of the crucial steps in its installation. False attachment of the wires could lead to connection failure. So, the system fails to alert the driver if the lines are not connected properly. The line connection of this product is not that complicated. These are the steps to complete the line connection from the radar to the indicator lights.

  1. Connection method of the power line:

The power circuit of a 24G MT-02 motorcycle blind spot detection system has two lines of different colors.

  • Connect the system’s red-colored power line with the vehicle’s ACC supply.
  • Connect the black power line with the negative pole of the bike.
  1. Connect the radar line with the power line.
  2. Install the warning lights to their positions.
  • It is better to install the warning indicator lights at a place that is easy to see while driving. Side mirrors or any place near side mirrors are the optimum positions for warning lights.
  • Make sure that you fix the left and right warning lights according to their respective sides.

What Circumstances Under Which The Radar Of 24G MT-02 Motorcycle Blind Spot Detection System Fails To Emit The Prompt?

Our 24G MT-02 motorcycle blind spot detection system performs exceptionally well in almost every situation. Yet, there are some conditions under which the radar may not emit the prompt. Some of these are as follows:

  1. If the vehicle is located at the rear blink spot of the adjacent lanes and keeps the same relative speed for a long time system can fail to detect the target.
  2. If the adjacent lanes are extensive, they exceed the computation range of the radar signal. So, the microwave radars can not detect the vehicles in those lanes as they are way out of their alarm area.
  3. When driving through the hills or on the top of hill roads, the radar may find it difficult to trigger the alarm.
  4. On the roundabout, the rear vehicles slide out of the signal range. So, the wave radar fails to detect, and lights can not blink to warn the driver.

A motorcycle blind spot detection system decreases the rate of lane-change collisions and overall accidents. Therefore, it provides a better and safer driving experience for the biker. The drivers can not overlook everywhere around all by themselves. So, the 24G MT-02 motorcycle blind spot detection system makes the monitoring easy with microwave detection. A blind spot monitor exceptionally improves the driving capability of a biker. However, a biker should never wholly rely on any blind spot system. These systems are manufactured only to assist the driver.

A biker should purchase the blind spot system from a reliable source to minimize errors and false detections. Our company uses extensive testing procedures to test our product capabilities. That is why our blind spot systems have nearly zero false detection rates. Our reliability and premium quality ensures the safety of drivers and their vehicles.

If you are willing to buy a blind spot monitor for your vehicle, give us a call, and we will get back to you with the best motorcycle blind spot detection system for your bike!

 

Scroll to Top