Blind spot monitor blog

Blind Spot Detection System For Heavy Vehicles | Is It Really Necessary?

Table of Contents

Introduction:

Do you know how many lives we lose yearly due to blind spots in heavy-duty vehicles? According to the US Department of Transportation, only in the United States, 5000 people are killed annually, and 400,000 accidents happen only because of blind spots.

Blind Spot Detection System For Heavy Vehicles

If we consider the fact that this is just a single country, the results are surely devastating. In this time of danger, what if we tell you that a blind spot detection system for heavy vehicles can prevent all that? You’ll surely mark it as the foremost necessity for every commercial, domestic, and industrial vehicle driver. After all, who doesn’t want to save lives by spending just a few dollars, right?

In this article, you’ll get all the evidence of why these systems are mandatory for your heavy-duty vehicle. Moreover, you are in for a treat, as this summary will help you assess how to choose an ideal vehicle for your vehicle.

Here’s Why Blind Spot System Is Mandatory For Heavy Vehicles

It’s a fact that heavy-duty vehicles aren’t easy to drive at all. There are multiple causes why complex vehicle management isn’t a piece of cake. Almost all these problems point out the size and complexity of these vehicles. That means they directly or indirectly are caused by the vehicle size and its working complications.

Below you’ll get a summary of problems that need a blind spot system as their solution.

● Blind Zone:

Considering the size of these huge vehicles, you can guess how difficult it can be to monitor the environment around them. Not only the massive size but its enclosed structure also creates invisible zones around the vehicle. Simply put, the size directly relates to blind spots. Here are some of the places that may come under this category:

  1. The Rear Of The Vehicle.
  2. Extreme Frontal Part
  3. Lower Lateral Sides

blind zone of heavy vehicles

But what’s the problem with these? The concept is simple. Seeing is believing! If you can’t observe an area around the vehicle, you’ll surely be unaware of any obstacle in it. As a result, the vehicle will be prone to a collision if you turn toward that sector unknowingly. For that problem, blind zone prevention, also referred to as blind spot monitoring, is the general proposed solution.

The best way to achieve maximum BSM accuracy is through a blind spot system. This product is more of an equipment collection. It helps to monitor blind spots accurately and constantly using digital algorithms. Thus, it saves you from unwanted collisions, no matter if it is an inch or a foot away.

● Individual Driving Workload:

Let’s be honest; any tiring work makes you exhausted. And that exhaustion leads to a grave mistake harmful to you and your vehicle. The same is the case with driving a heavy-duty vehicle. It is really difficult to manage 72 feet long and 13 feet tall vehicles all by yourself. For that reason, you need some sort of assistance while driving. That’s what the blind spot detection system for heavy vehicles supplies you with.

This millimeter wave radar system acts as a secondary eye for the driver. With its assistance the driver can get a radar signal monitoring field around the vehicle along with an physical overview of the surroundings. As a result, it helps not only to monitor but also to alert the driver in case of a possible collision.

How Do Blind Spot Detection System For Heavy Vehicles Differ From Ordinary BSM?

Undoubtedly, every blind spot detection system for heavy vehicles works the same. So, we can’t say that its compatibility with a vehicle can change the way it works. Yet, some of these are different and designed for distinct purposes.

If we talk about blind spot detection system for heavy vehicles specifically, it can change when it comes to the system features. Still, the overall blind spot detection system working stays the same. The BSM for heavy-duty vehicles can differ from an ordinary BSM system in the following parameters:

● Equipment Number:

This part involves the overall number of components used in an ordinary system. For instance, the general system involves the integration of a single millimeter wave radar. On the contrary, a blind spot detection system for heavy vehicles uses two blind spot sensors each for singular lateral sides. Besides that, some systems have more than two sensors that target both the rear and frontal portions.

Moreover, if you take a look at the warning equipment of heavy vehicle BSM system, you can see significant change there as well. For example, consider the usage of multiple warning lights. Heavy-duty vehicles aren’t prone to a single radar. Instead, they are vulnerable and at risk from multiple sides due to multiple obstacles. That is why drivers need extra warning lights that can alert them simultaneously.

Moreover, a blind spot detection system for heavy vehicles must have a buzzer in place to enhance the alarming procedure. It generates a sound every time an obstacle is detected. Therefore, it makes sure that the warning message gets delivered in time.

Heavy Vehicles BSM equipment number and specifications

● Equipment Specifications:

Aside from the numerical value and equipment order, the technical features may also vary. To explain this statement further, let’s assess the frequency band as an example. The frequency band changes the radar numerical value and technical specification. Usually, the blind spot detection system for heavy vehicles has a high-value frequency band.

But the intensity is not the only thing a radar’s frequency band affects. It can impact the radar blind spot detection system massively by the following factors.

  1. Increasing Detection Range
  2. Enhancing Detection Accuracy
  3. Reducing False Detection
  4. Preventing Detection Errors

Governmental Obligation To Use Blind Spot Detection System For Heavy Vehicles

Countries all over the world have different perspectives on using the BSM. The developing nations are far behind in integrating its usage as a law. But why’s that? The reason is their underdeveloped economy. These nations have far more alarming issues to deal with. So, these road-associated problems get ignored as they aren’t the priority anymore.

However, as we jump up a scale to the developed countries, things change with a snap. Before talking about the acts and laws of blind spot detection systems for heavy vehicles, let’s briefly introduce how things got up to this point.

government obligations on bsm

A few decades back, people never thought BSM would integrate the system as a law. The drivers always knew they needed some assistance, but it wasn’t until the late 1980’s that these systems appeared in the markets. Since then, blind spot solutions have made a giant leap in the automotive industry.

Just a few years back, experts suggested that the time isn’t far when these things will get the law standard. What they expected back then has turned into a reality right now.

  1. According to Australian legislation passed in February 2021, all truck manufacturers must add a blind spot system inside their vehicles. Moreover, according to Australia’s National Heavy Vehicle Regulator, rear-view mirrors and cameras also come under this act.
  2. That is not just the story in a single state. Canada has also made blind spot systems vital by inducing them inside their automobile crash prevention law.

There are many other examples out there that point out how developed and developing nations are making it a common practice to add BSM in heavy-duty vehicles. And that’s a good thing as it helps save lives and monetary vehicle damage.

Can Heavy Vehicles Survive Without A BSM?

To answer this question, first, we need to assess the meaning of the word “survive” in the query. If by surviving you mean driving the truck without any assistance and still preventing collisions in blind spots, then No! It’s a fact that you can’t monitor the blind zones all by yourself in a heavy-duty truck.

Therefore, preventing collisions isn’t possible without a BSM unless you have some other way to observe your blind spots. But are there any other ways available? Unfortunately, there aren’t any that can serve the purpose with the perfection equal to BSM.

Blind Spot Detection in commercial vehicles

You can go for extra wide blind spot mirrors and extra mirror reflections for additional vision. However, those too will leave you hanging in a situation as they can’t cover the spots 100 percent. So, a blind spot detection system for heavy vehicles is the most viable option because of its ability to give you all day view nonstop.

Final Thoughts

All the above statistics, statements, and summaries make it clear that using a blind spot detection system for heavy vehicles is vital. Moreover, by assessing the above figures, you can judge that it isn’t just about you but other road individuals also.

That is why these systems are taking big progress leaps in the automobile industry. However, with greater exposure comes greater risks. Therefore, the more shops there are in the market, the fewer chances you’ll have to find an ideal product.

But we are not leaving you behind here as well! We have a perfect and suitable fit for your heavy-duty vehicle, all set with a blind spot system. If you are in need of one, send us a message. We will get back to you with all the information.

Related Posts

Scroll to Top